Valves - Fittings and Accessories - Valve Drivers - Bottle Caps - Bubble Traps - Columns - Pumps - Blowers - Sensors and Controls - Timers

Fittings And Accessories:

Inert Fittings (Bio-Chem) (Omnifit)

• No metallic components
• 500 psi pressure rating
• Easy installation

Mounting Hardware (Bio-Chem)

• Polypropylene mounting flanges
• Aluminum Mounting rings
• Spring steel mounting clips

Valves - Fittings and Accessories - Valve Drivers - Bottle Caps - Bubble Traps - Columns - Pumps - Blowers - Sensors and Controls - Timers

Fittings And Accessories:

    The Omnifit Gripper fitting with PTFE seal is provided in sizes for 1/16'' and 1/8'' O.D. hard tubing. The gripper fitting system uses a fitting made of polypropylene or PEEK with a 1/4''-28 or M6 thread and a PTFE gripper that attaches when twisted on the tubing.

    The Bio-Chem and Omnifit lines of tubing include hard types in PTFE and Bev-A-Line and soft types in silicone and Bio-Chem.

    The Omnifit range of connectors is a versatile system for connecting different types of tubing instantly, including stainless steel, PTFE, glass and silicone. Tubing sizes between 1 and 11 mm can be connected using either Viton 'O'-rings or PTFE cones. Configurations include 2, 3, 4, 6 and 8-way options.

    Bio-Chem Valve solenoid valve products can be mounted with clips, rings, or flanges. Each product accommodates the different shell sizes.

   The CoolCube™ control module provides a "hit and hold" circuit for solenoid valves by stepping down DC voltage to 1/3 of input voltage, minimizing heat generation and permitting a faster response time.