Valves - Fittings and Accessories - Valve Drivers - Bottle Caps - Bubble Traps - Columns - Pumps - Blowers - Sensors and Controls - Timers

Valve Drivers

Valve Drivers/Cool Cube Control Module (Bio-Chem)

• Provides a “hit and hold” circuit for solenoid valves by stepping down DC voltage
• Reduces Electric Power Consumption while in the “hold” setting
• Permits Faster Response Time
• Allows Higher Valve Flow and Pressure
• Turns valve off immediately when power is cut to the circuit
• Terminal Pins permit easy installation
• Can be mounted directly to 075 and 100 series solenoid valves

Valves - Fittings and Accessories - Valve Drivers - Bottle Caps - Bubble Traps - Columns - Pumps - Blowers - Sensors and Controls - Timers

Cool Cube Control Module

   The compact CoolCube™ solenoid control module products provide an easy way to achieve a "hit and hold" circuit independent of the rated voltage. When a CoolCube™ is connected between a solenoid valve and a power supply, it delivers a "step-down" function. It accepts a range of inputs from 12 to 36 VDC and passes the input on to energize the solenoid valve with full power for 100 ms. After 100 ms, the CoolCube™ drops the voltage and current to a level sufficient to hold the solenoid in the energized position. The benefits are less power consumption and lower heat generation. The CoolCube™ can remain under power indefinitely without being damaged. When the power to the CoolCube™ is cut, the valve is turned off immediately, as though the CoolCube™ was not in the system.